Q125 2000A HIGH ACCURACY BUS BAR AC CLAMP ON CURRENT TRANSFORMER
The model Q125 current clamp on measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection.
FEATURES
- This product can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection.
- Holding wire diameter: 120mm*50mm
- Dimension: 116mm×327mm×35mm
- Load capacity: mA output ≤4Ω, 1A output 0.1Ω, 5A output 2.5VA
- Installation: clamp type
- Output mode: lead output
PARAMETERS
| Electrical parameters |
| Ratio |
1000: 1 or 2000:1 (customized) |
| Accuracy class |
0.2%, 0.5%, 1% |
| Primary current |
0 - 3000A AC |
| Secondary current |
0 - 5A AC (customized) |
| Max. Cont. Input current |
3600A |
| Over voltage category |
CAT III 600 V |
| Output signal (AC current) |
500mA,1A,5A AC at nominal input current |
| Output signal (AC voltage) |
333mV,500mV,1V,5V AC at nominal input current |
| Frequency range |
40Hz-2000Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
| Temperature range |
-20°C to +55°C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Standard |
EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation |
Clamp type |
| Output mode |
Lead output(2.5m) |
| Mechanical parameters |
| Dimensions (L x W x H) (mm) |
116 x 327 x 35 |
| Weight (g) |
1200 |
| Holding wire diameter (mm) |
φ120 x 50 |
| Max. jaw opening (mm) |
50 |
| Jaw Color |
White |
| Material |
PC+ABS+Polycarbonate, UL94 V0 |
