Q110 SQUARE JAW OPENING MAGNETIC COMPACT AC CURRENT CLAMP
The model Q110 current clamp is a high accuracy ct, the advanced design ensures enhanced linearity and the jaw opening system provides enhanced safety.
FEATURES
- This product can be used in large current situation; also can cooperate to cable fault tester and cable identification device, used for cable test work.
- Holding wire diameter: φ110mm
- Dimension: 163mm×310mm×34mm
- Load capacity: mA output≤4Ω, 1A output 0.1Ω, 5A output 2.5VA
- Installation: clamp type
- Output mode: lead output
PARAMETERS
| Electrical parameters |
| Ratio |
1000: 1 or 2000:1 (customized) |
| Accuracy class |
0.2%, 0.5%, 1% |
| Primary current |
0 - 1000A AC |
| Secondary current |
0 - 5A AC (customized) |
| Max. Cont. Input current |
1200A |
| Over voltage category |
CAT III 600V |
| Output signal (AC current) |
500mA,1A,5A AC at nominal input current |
| Output signal (AC voltage) |
333mV,500mV,1V,5V AC at nominal input current |
| Frequency range |
40Hz-2000Hz |
| Dielectric strength |
3KV 50Hz/60Hz at 1 minute |
| Temperature range |
-20°C to +55°C |
| Output |
2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors |
600 V |
| Standard |
EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation |
Clamp type |
| Output mode |
Lead output(2.5m) |
| Mechanical parameters |
| Dimensions (L x W x H) (mm) |
163 x 310 x 34 |
| Weight (g) |
900 |
| Holding wire diameter (mm) |
φ110 |
| Max. jaw opening (mm) |
110 |
| Jaw Color |
Black |
| Material |
PC+ABS+Polycarbonate, UL94 V0 |
